DiveAlert Plus v.2 HORN
DiveAlert Plus v.2
DiveAlertPLUS is a specially designed, small, lightweight pneumatic signaling device that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator. Installation is easy and takes only a moment. DiveAlertPLUS uses a small amount of air from your SCUBA tank to make a piercingly loud sound in air or water. People have been able to hear a DiveAlertPLUS one mile away from a diver in need above water. In conditions where visibility is limited, a DiveAlertPLUS can be a lifesaver. Underwater you can sound for attention quickly with a squeeze of the device.
NO MODS REQUIRED
DiveAlertPLUS does not require any modification to your equipment, and it does not interfere with the normal operation of your equipment. The DiveAlertPLUS comes in three different models to accommodate different connectors: DV1, DV2, and DV3.
EASY TO USE DESIGN
Once the tank is turned on and the DiveAlertPLUS connected, squeeze the DiveAlertPLUS softly underwater for a subsurface signal. Or squeeze it firmly on the surface for a loud surface signal blast. Check that the DiveAlertPLUS is installed correctly and functioning properly before every dive. Also be careful not to point the DiveAlertPLUS toward yourself or toward anyone who is in close proximity to you when you activate the surface signal (it’s really loud!).
After each use, the DiveAlert PLUS should be soaked with warm fresh water. This is especially important after use in chlorinated swimming pools and in other water having corrosive substances. Additionally, it is highly recommended that you blow the water out of the DiveAlert PLUS before storing. This can be done by pressurizing and activating both the surface and subsurface signaling elements. (We recommend that you cup your hand over the surface signaling element to muffle the loud noise.)
HOW IT WORKS
The DiveAlertPLUS uses chrome-plated brass couplings to attach to your power inflator. Squeezing the device engages the actuator valve stem causing a small amount of air to flutter a stainless steel diaphragm, emitting a piercingly loud sound from the injection-molded thermoplastic body. The subsurface / underwater signal is produced by a percussion "buzzing" noise made by a piston hitting a stainless steel diaphragm much like a drum.
|Body and Internal Elements:||Injection-molded Thermoplastic|
now get installment plan frm 6 to 12 months with your credit card Maybank and Public bank with min order RM 500 . please whatsapp to +60192867180 or email to email@example.com
for Bcd / Regulator / Bag ( mesh bag / trolley bag / dry bag ) / under water torchlight/ fins / mask/ camera /underwater casing /wet suite and rush guard all free postage to malaysia address.
for non malaysia address . we will post by DHL / UPS / Fdex / ARAMEX and TNT but buyer(s) need to pay additonal charge for postage .we will post worldwide .more info please email to us .